PDA

View Full Version : tuning problems


mick thomo
17-01-08, 06:55 PM
i'm having some problems tuning my alpine compound bow. it's set at 55lb with a 29" draw weight. i had it sighted by my archery guy but have knocked the sight. i shoot with my fingers and a finger tab. my arrows are easton gamegetter xx75 2315 lite, not cut and i have two different types of nocks on them.shooting with 125gr satellite aero broadheads minus blades.when i shoot one type of nock my groupings are good but with the other type their off by about 100mm.should i get them cut to length and all changed to the same nock for greater consistancy? the arrows also enter at an angle and look like they wobble around alot in the air. is this from the length of the arrow or my shooting?
please help:(

XTfreak
17-01-08, 07:14 PM
First off.
Get all your arrows cut to the same length.
Get all your arrows with the same nocks.
Make sure center shot is on.
Then try your bow and see how you go.
If you have any more troubles just let us know.
We will try to help...
Bill

mick thomo
17-01-08, 07:44 PM
archery guy away till feb ne one now of an arcgery shop near nowra nsw? not the shooting store had a bad experience there.
centre shot is on xtfreak. thanks for the help

belegstrongbow
17-01-08, 07:49 PM
Try the Easton tuning guide. It will solve most tuning problems straight off.
Just google it to find it.

Good luck mate.