Assembling arrows...wat gear do i need?

[mr_kris]

As per the title, what gear do i need to fletch my arrows, adding the nocks and making sure i get a good square cut for all the bits and pieces...So a good comprehensive list would be nice. cheers:P

[XTfreak]

Arrow cut off saw (commercial made or homemade)
G5 squaring tool.
Fletching jig
Glue
If you do a search for arrow saws on here you will find many easy to make at home saws.
Bill

[Bowfly]

Check this out mate I just put up a bit of a show on how I make mine
http://www.aussiebowhunter.com/showthread.php?t=10251
Hope you see what you need.
Rod

[mr_kris]

what's a g5 squaring jig for? I understand what a fletching jig is used for but not the g5...

[crittergitter]

scotch bright pad- for ruffing up the shaft
acetone- to clean the shaft
some type of razor knife- to remove old fletchings and glue
fletching jig- arizona easy fletch http://www.bowhunting.net/evaluation/2004/ArizonaEZ-Fletch.html
glue-


i use hot glue for my inserts so i also have a small torch to heat the insert and glue up

i use this saw to cut my shafts and have just made a jig to go with it so i get a square cut

http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=42307

hope this helps

[XTfreak]

G5 squares the end of the shaft after cutting. Can also be used to square the insert Once it is glued into the arrow) if needed.
http://www.g5outdoors.com/#sec_asdtool
Bill