Pictures Of The New Bow

[hunt or be hunted]

Ross CR331

about #60

26'' dl

Toxonics 5pin sight

Whisker Biscuit Rest

Self Aligning Peep

Vista Quick Detach 5 Arrow Quiver (made for mechanical heads, should hopefully work with fixed blades)

Here It Is:D

Not The Best Pic, Its A Nice Bow Though;)
http://i157.photobucket.com/albums/t76/go_and_hunt/044.jpg

i just need a d-loop and it will be fully set up.

Dan.

[HareSplitter]

nice, looks awsome!!

[spiderbait24]

top bow!

[Thwack!]

Nice bow Dan, it should serve you well.

If the draw length feel right, you know you can clip your release straight onto the string without a D-Loop don't you. You just have one nock set above the arrow and clip onto the string under the arrow. Some prefer that over a loop, worth a try, if you haven't already.

[XTfreak]

Nice bow Dan, it should serve you well.

If the draw length feel right, you know you can clip your release straight onto the string without a D-Loop don't you. You just have one nock set above the arrow and clip onto the string under the arrow. Some prefer that over a loop, worth a try, if you haven't already.
Exactly.
It worked well for me for over 12 years.
Enjoy the bow...
Bill

[hunt or be hunted]

THWACK! i did give that a go, i have a release that was made for the string aswell as a normal one. it parted the serving a tiny bit only after about 4 shots so im just going to wait until i get a d-loop, might just try shoot fingers until then.

thanks dan.

[DavidJHardy]

nice...
why don't you use a stabilizer... you didn't have one on your last bow either.

[Luke]

THWACK! i did give that a go, i have a release that was made for the string aswell as a normal one. it parted the serving a tiny bit only after about 4 shots so im just going to wait until i get a d-loop, might just try shoot fingers until then.

thanks dan.

I've had that happen every time too... gotta have the right release and frankly, I'd rather snap a d loop, than my string ;)

Bow looks good Dan, should be smokin' those bunnies real soon mate :D

PS... looks like you need an upgrade in peep tubing though ;)

[aussie.rum.pig]

nice looking bow mate

[hunt or be hunted]

nice...
why don't you use a stabilizer... you didn't have one on your last bow either.

because i dont have one...i will get one eventually.

Thanks guys.

dan.

[tomshaw]

very nice dan. cant wait to see you shoot it

[brendan e]

nice looking bow dan. the game around your area will be in strife now. good shooting mate.
cheers

[Kassidy ledger]

hey nice bow how much did that cost i wont one were did you get it from

[hunt or be hunted]

hey nice bow how much did that cost i wont one were did you get it from

hey mate, i bought it off US ebay. cost me $299USD. its a Ross CR331, look into them, they are NICE!

dan.

[DavidJHardy]

because i dont have one...i will get one eventually.

Thanks guys.

dan.

i tell you what you'll feel the difference when you get one man.

[DavidJHardy]

I've had that happen every time too... gotta have the right release and frankly, I'd rather snap a d loop, than my string ;)

Bow looks good Dan, should be smokin' those bunnies real soon mate :D

PS... looks like you need an upgrade in peep tubing though ;)


tie floss over your serving were your release goes

[hunt or be hunted]

heres a question for you guys. on the limbs it says 50 60#-60 70# 70-80# what i want to know is, does that mean the bow goes from 50# all the way up to #80 or is it the different poundages you can ask for when you buy the bow?

thanks dan.

[Sparra]

The different poundage sections ie..50#-60# 0r 60#-70# normally have a square or circle beside them with a tick in the one that is relevant to your bow...

[hunt or be hunted]

i got the #60-70 should of got the 50-#60 so i had a better shooting bow. ohwell im sure i will grow into it soon enough.

dan.

[Simon_R]

Nice bow Dan, sounds like you got a good deal.

[aussie.rum.pig]

because i dont have one...i will get one eventually.

Thanks guys.

dan.

hey mate if u need a stabilizer....... i think i have 1 here some where just pm me your ad and i will send it to u

[hunt or be hunted]

cheers, sent.

dan.

[PATBOWTECH]

BEST OF LUCK WITH THE BOW MATE

[Kassidy ledger]

hey how much did it cost with all that gear on it

[special]

Let me know if you need some d loop Dan..ill post you a bit....if you want 50/60 limbs give Rob at casino a call..approx $120 i think.