Sight adjustments

[Grunter]

Was wondering. I am using a Copper Johns sight five pin and a Quicktune 1000 rest and Fletcher true peep. The problem is that i have run out of adjustment on my sight for 50 and 60 yards, for 3D target range shooting. My anchor point is faily low already, at level with my jaw line. If i adjust the rest down a little will this affect the line of my arrow release if i adjust the nock point down 1/4" lower as well, it is now at 1/4" above center. I have to adjust the peep as well. Also my arrow speed seams to be a little down. I am using Beeman ventures 340's with 60 grain fieldtips. I also use Whitetails 65/80 with the same fieldtips. The bow is a Mathews Outback set on 72 lbs and the string is a new Zebra. Any ides would be welcome.
Cheers Grunter

[terry prowse]

try moving your sights back one set of holes towards the string, ( I think that you have the sight set to far forward), I had the same problem and this fixed it fast. :idea:

[Mozza]

you should be able to do it grunter
I shot the same bow and sights and have a 60 meter pin in it.