WTB FRED BEAR TAKE DOWN RECURVE.

[ALAN MCKENZIE]

I am looking for a FRED BEAR take down recurve RH with either or both handle sizes.
Draw length around 31inches.

Al

[woody]

Alan,
What poundage are you looking for.? With a 31" draw, you may be best served with a C riser, 64', 66", 68" bow length, so that finger pinch and smooth draw are not a problem.

[aussiehunter]

ebay.com is always a good place to browse as well.;

pat :)

[ALAN MCKENZIE]

Woody,I didnt know that a C riser was available.
I havent had much to do with archery for 25 years so have a lot of learning to catch up on..
I am looking for about 55# @ 31"

Aussie hunter,thanks for the heads up on Ebay.

Adam,thanks for offer,can get a new one out of the states for not much more.

Al

[woody]

Alan,
C risers havent been made since around the mid 70's. The magnesium C risers are very common on ebay.

Timber C risers still pop up occaisonally, but being very rare, cost much more.

Magnesium C riser bows usually go for less than $350 US on Ebay 8)

[ALAN MCKENZIE]

Thanks Woody,I have been told that since Fred died that all bear bows are made in Japan.
So to buy an old one is the way to go.
Al