Sighting in a S2

[jpbon]

Hi there guys just wondering if any one is familiar with the GWS S2 4 pin sight. Not quite sure how to sight it in and it would be great if someone could help me with it.

cheers

jpbon

[Puk]

What is troubling you mate?
Remember to paper or bare shaft tune your bow before you worry about your sights. Then when you have it shooting right, put the sight on, start up close where you can't miss by too much, 10 m, for example.

Have a shot, remembering your form, and move the pin to where the arrow went. The windage (left/right) is adjusted all together, by moving the long bar. Then you can "gang adjust" the elevation by adjusting where you attach the "sight window" to the bar. Then you individually adjust the pins to suit, 10, 20, 30m, etc.

I had an S2 for a while. You will need three different sizes of hex keys (It is easier to buy a hex key wrench that has them all)

Remember, chase your arrows. Don't do it every shot. Shoot three maybe, and if they are going high, move your pin up. If they are going right, move the "windage bar" to the right. You will get there eventually.

Once you have got it in basically the right place, you need to individually adjust each pin. It is a bit of work, but when you know you can smack CD sized target right on 10, 20, 30 metres, it really helps your confidence.

Then practice!

Puk

[jpbon]

in the process of sighting it in.

Thanks for the tips Puk, they helped heaps

Cheers

jpbon