all in line?

[NoLegolas]

hey guys,
Quick question I have been progressively tuning my baby and have noticed something. My groups at 20m are approx 2in and at 30m are approx 3in however when I look down at the bow and line up the cams and the rest down the centre of the riser the sight pins are approx 8-10mm to the left, is this normal? I was under the apparent misconception that the pins should be in line with the rest, cams, string etc etc any light shed would be great thanx

[woodstoka]

not shore mate but are your arrows fish tailing if not i wouldnt worry about it

[Kimall]

Mate I always say to guys get the arrow flying perfect and then just move the sights to were it is shooting.To many try to get good arrow flight at the same time as adjusting sites.
Cheers KIM

[NoLegolas]

cheers for the input, I've noticed that since beginning my arrows are penetrating my target a good 5-6 inches more so I take that as a good indication of better arrow flight and I need to remember to only change one thing at a time.patience grasshopper.

[Wareagle]

It has been my experience, when the pin is to the side of the string, the bow is being torqued, usually by the way the bow is gripped.

[Wellsy]

If you use a peep, I would agree with Wareagle, If you don't it could be your eye is looking around the right side of your bowstring in which case your pins will not line up with your rest and string.