Noakesy
15-07-06, 01:40 PM
hey guys if your having trouble with installing peeps or sites heres a step by step instruction on how to do it. if theres any questions plz dont pm me just post them here.
1. get your wheel peep and geta knitting needle or the back of a teaspoon to split the string. DO NOT GET ANYTHING SHARP
2. now stick it in the string but not half betwwen the cables, put it in about a third of the way and lever the teaspoon to split the string
3. now you will see 3 slots in the wheel peep. put the third of string in here and split the other 2 3rds in half with a fingernail. now theres no art to this bit but just put the strings in the next 2 slots any way you can.
4. now there should be roughly same amount of strings in all slots. dont worry about counting them or anything just get a rough idea.
5. now it is time to tie the peep in. in order of the best choose one of the following. serving mono filiment (orfishingline but this is hard to tie) dental floss or i have heard you can use cotton with string wax all over it.
6. cut about 3-4 inches of the tie in and look at the peep strings where it comes all to one cable (about 3 inches from the peep) and tie any kind of fancy knot with the tie in around the cable, i prefer half hitches.
7. now wrap the string around and around downwards toward the peep until theres about 2cm of string left.
8. pull this fairly firm and tie another knot too keep it there, now tie this knot a few more times to make sure.
hope this helps with any needs
1. get your wheel peep and geta knitting needle or the back of a teaspoon to split the string. DO NOT GET ANYTHING SHARP
2. now stick it in the string but not half betwwen the cables, put it in about a third of the way and lever the teaspoon to split the string
3. now you will see 3 slots in the wheel peep. put the third of string in here and split the other 2 3rds in half with a fingernail. now theres no art to this bit but just put the strings in the next 2 slots any way you can.
4. now there should be roughly same amount of strings in all slots. dont worry about counting them or anything just get a rough idea.
5. now it is time to tie the peep in. in order of the best choose one of the following. serving mono filiment (orfishingline but this is hard to tie) dental floss or i have heard you can use cotton with string wax all over it.
6. cut about 3-4 inches of the tie in and look at the peep strings where it comes all to one cable (about 3 inches from the peep) and tie any kind of fancy knot with the tie in around the cable, i prefer half hitches.
7. now wrap the string around and around downwards toward the peep until theres about 2cm of string left.
8. pull this fairly firm and tie another knot too keep it there, now tie this knot a few more times to make sure.
hope this helps with any needs