vanes for rhinos

[batesy]

I'm after some advise on vanes for carbon tech Rhino arrows. I haven’t used carbons since they were skinny and solid. I currently use 5 in vanes on 2317's using a 100 grain 2 blade head.
The arrow length is 29 inch and I win be using for hunting only.

Any info on what you use or recommend would be a help. Also what glues use on vanes and inserts for carbons.

Thanks Guys, John.

[PeterM]

Just use normal glue, flechtite or arrowmate work really well or the super glues all work on CT shafts mate.

Also you might consider this 3 x 2 inch blazers vanes are 14 fps quicker than 3x5 inch vanes, and will stabilize a quality BH when they are made up with a helical clamp.

Check out my Tribute to the test thread to see the specs.

[Luke]

3 x 2 inch blazers vanes

Work very well for me John.

I only use an offset straight jig and they still control superbly.

Luke 8)

[batesy]

Cheers guys.
John

[jpbon]

when i saw the post i thought you meant what vanes are good to HUNT rhinos :P My bad!

i use loctite 401 for fletching and that works pretty good but the others that Peter mentioned work great too. As for inserts i got permepoxy. weird name but sticks the inserts like concrete!

cheers

jpbon