PDA

View Full Version : arrows for the curve?


jerry redman
12-02-07, 01:11 PM
just got off the phone to an archery dealer and i ordered 75 95"s he recomended 55 75 what do yous think

FentonW
12-02-07, 06:52 PM
What weight curve and what weight points you plan on shooting will help anyone give advice.
Cheers, Fenton.

jerry redman
12-02-07, 10:17 PM
well i i ordered 75 95's im shooting a 55 pound curve the arrows are 8.9g an inch and there spine is .340" what broadhead should i choose out of 125g 135g or a 160g i dont much about all this **** so you might have to help me out a bit, the 75 95s are on there way so i cant change them, so im gunna have to make do.

adam
12-02-07, 10:22 PM
I shoot the same spine jerry with 145grain head, but just play around with them abit it won't be hard to get them shooting straight.

Adam

Luke
12-02-07, 10:24 PM
Why so stiff?

Is that because of such heavy weight up front softens them up?

cheers

8)

Sparra
13-02-07, 06:41 AM
What length are you going to have them???I was always under the impression that anything under 10gpi could be detrimental to your bow(similar to a dry fire) but I guess with a heavy broadhead they would be close to that anyway...Adam,do you weight your arrows???
Sparra...

howie
15-02-07, 08:46 PM
I would of ordered 2 of each, 35/55, 55/75. Cut them down whilst bare shafting them, and gone from there. I reckon the 75/95's might be too stiff. Be intereste to know our results.

rory
15-02-07, 10:28 PM
Cut to 29.5", and a 150-160 total grain head, the internally weighted 75/95's have shot very well out of my mid 60's # recurve for the last 9 months :D

Clinglish
15-02-07, 11:36 PM
Three rivers sells a carbon kit with shafts in each of the weight ranges so you can tune your bow.
I use 55/75 GT trads out of my Bows and they are 55# and 57# @ 28 at my draw Im pulling 60# and 62# respectivly I cut them to 29.5 and I stick about 250 grains of broadhead and insert weights up the front and they fly like bullets.
If you find they are a bit stiff jerry I have a couple of 190 grain ribies you can try to soften them up with .Or grab some 243 bullets coz they are 6mm and they fit snug behind the insert.

adam
15-02-07, 11:39 PM
243 projectiles Clint :?: