Wennsel woodmans BHs whos used

[ozzyshane]

I like the look of the wennsel woodmans broadheads any body had any ex with them .Thanks Shane

[adam]

Shot a bit with these heads mate, pretty good but had a few bend on bone of late so have moved away from them. Also the blades bend pretty easy above the vent.
Also the back of the blade were it joins the ferral has snapped on a few. Mind you there all had a few kills already and snarpened a few times over, so maybe that has weakened them
Adam

[rory]

Never used WW mate, but have used Magnus Snuffers, a very similar head.

They are a nice head, I have mainly shot them out of my recurve though so flight at high speed I am unsure of.
Both WW and Snuffers can be a little 'soft' in the blade where they are vented as they are carbo steel and thin out around that area (similar to Adam's findings)

[ozzyshane]

Thanks for the feedback guys the snuffer have a big cut 1.25 could be a bit to big for the wheelies where the ww are only 7/8 Thnaks Shane

[howie]

Similar findings as the boys stated, the WW weigh 125 grains from memory, not enough steel in them to make them strong enough. I am currently using 160 grain Magnus 3 blade snuffers thru my compound, I remove about 3 or 4 mm of the needle point and this reduces any bending at the front. I quite like them as they cut unbelievable wound chanels. Yes they bend but what broadhead doesn't besides the 190 grain elgrande, (which are too narrow for my liking). Since using the Magnus my blood trails and recovery have reduce remarkedly. Howie