nock square for WB users help

[Waldganger]

Hey guys that use a WB, have you found a square thing to set your nocking points that works without having to remove your WB? I've got the biccy set right from a bloke at the shop after I thought I had it set right.

He actually improved my shooting so he must've been right and I don't want to remove it and stuff myself up much, I just want to put on the new string and set the nocks up.

pics or brand name/supplier would be much appreciated.

cheers guys

[ENGLISH]

if you cant use a bow square with the WB you could try measuring your old string on the bow from a referance point that will be the same on your new string say,from where the string leaves the top cam to the bottom of your nocking point then when you have your new string on just take the same measurement and add the nocking point .
hope it helps
cheers
mark.

[timbo]

All I do is stick the bow square throught the WB from the string side. Clip it onto the string then set it on top of the black fibres. This won't cause any damage to the fibres and allows you to use your exsisting exquipment.

Cheers Tim

[XTfreak]

http://www.abbeyarchery.com.au/p/SA0428/Saunders+Bow+Square+Forked+Horn.html
That should do what ya need...
Bill

[Friar Tuck]

XTFreak is on the money if you want to buy a square for the job.

You can however get it done by removing the biscuit where it joins to the arm that is attached to the riser. Just ensure that you put a line with a fine pen where it is positioned and put it back in the same spot again. If it is the deluxe model it will have lines marked from which to take a reference point.

[HOOD]

All I do is stick the bow square throught the WB from the string side. Clip it onto the string then set it on top of the black fibres. This won't cause any damage to the fibres and allows you to use your exsisting exquipment.

Cheers Tim

Thats what I did no probs at all.